[Looking for Charlie's main web site?]

Slides available for my two recent talks - Hidden gems in CF10 & About ColdFusion 10 on Tomcat

Note: This blog post is from 2012. Some content may be outdated--though not necessarily. Same with links and subsequent comments from myself or others. Corrections are welcome, in the comments. And I may revise the content as necessary.
If you're interested in checking out the slides for my two most recent talks, they are now available online:

These were offered recently at cf.objective() and the SOTR/CF10 European Tour events, as I had announced a couple of weeks ago.

These are just PDFs of the slides for now, no recordings. But as those who have seen me talk before know, I tend to offer a lot of detail in my slides, so that they do stand well alone (against the modern fashion of slides that are mostly just pictures).

Sure, I could do more pictures and offer slide notes. It's not that you can't teach an old dog new tricks, just that it takes a lot more patience! :-) I may modify these presentations that way, in fact, for future presentations of them. In fact, I will be blogging shortly about the next planned presentation of them for the Adobe CF 10 Developer Week coming up in June.

BTW, apologies to any folks from the two events who had looked for the PDF for the Tomcat talk previously. Somehow I had failed to offer a link to the PDF on the presentations page, even though I was updating and uploading new variations of it both before and after the events. Darn.

Speaking this week at cf.Objective() - Two coldfusion sessions and a lightning round talk

Note: This blog post is from 2012. Some content may be outdated--though not necessarily. Same with links and subsequent comments from myself or others. Corrections are welcome, in the comments. And I may revise the content as necessary.
Just a heads up for those at cf.objective, which starts tomorrow. I'll be presenting 3 times.

First, I'm giving two different sessions on Thursday and Friday:

See the links above for details on each talk. And as always, I'll post these talks (after presenting them) on my presentations page.

Then, on Thursday evening I'm giving a Lightning Round talk. Last year I did one on "Lies, Damned Lies, and Request Timeouts". This year, I will again do a CF-centric talk--someone has to talk about something other than beer, love, and other heartwarming or life-expanding talks. :-) This year, it will be "10 Things That Plague Most CF Servers, with Solutions". Yep, even in 6 minutes, I hope to share some surprises that many miss, but which I see daily in helping people in my CF server troubleshooting consulting services.

I'll be posting the presentation for that as well, but it will have additional detail (in terms of resources to learn more) on each topic.

Looking forward to seeing old friends and making new ones. Please come say hello, and be gentle with me if I may not make an immediate connection of face to name. :-) With the blessing of attending and speaking at so many conferences comes the curse of meeting lots of people, only briefly, and often only once (or once in a great while!)

Finally, I'll note I am also presenting the first two talks above again next week, in a 5-city European tour. More on that here: Speaking May 21-25 in 5-day European #ColdFusion Road Tour, Scotch on the Road.

I'm speaking on CF Meetup at noon US EDT today - on using and securing RDS in CF Editors

Note: This blog post is from 2008. Some content may be outdated--though not necessarily. Same with links and subsequent comments from myself or others. Corrections are welcome, in the comments. And I may revise the content as necessary.
Today at noon (US EDT) I'll be speaking on the CF Meetup, about using RDS in Eclipse, DW, and HSStudio, as well as security issues, including changes in CF8 that may make it more acceptable to use in more environments. I think many will be surprised by what they can do via RDS in all the editors.

I announced both of today's meetup sessions yesterday, as I do each week, but I don't bother with all the details of each talk so as not to overwhelm my readers here. I give the link to the talk's event page on the meetup site and let interested readers go view them there.

Since this is my talk, I thought my readers may benefit from a more detailed clarification of my talk today, thus this entry. Here are the details:

Leveraging RDS in Eclipse, Dreamweaver, and Homesite+/CF Studio: It's more secure and more useful than you may think

Are you using the RDS-enabled features in Eclipse, Dreamweaver, or HomeSite+/CF Studio? If not, you could be missing out on a lot of increased productivity, from the query building tools it enables, to the component browsing tools, to enabling file access across the web, and more.

Perhaps it's been disabled on your server, or people may argue that it's insecure. If you could be shown how it could be secured, might you (or your admin) reconsider it? I think it?s a tragedy how many developers suffer without leveraging RDS, certainly on their own machines, and even on shared servers.

Whether you think RDS evil or a blessing, or are unaware of what it enables in your favorite CFML editor, and whether you use CF 8 or earlier, there may be more to RDS than you realize. And there are solutions to security concerns, especially in CF8 but even beforehand.

In this talk, frequent CFUG speaker Charlie Arehart will show you all the ways that RDS can be used to make you more productive in Eclipse, Dreamweaver, or HomeSite+. He'll also address (and in some cases resolve) common security concerns, especially the multi-user RDS security available in CF 8 (and CF 4 and 5), as well as how to enable it if it's been disabled (assuming you have the right to make configuration changes, of course).

Join us online at noon. Anyone's welcome. No preregistration required (though you may want to consider it: see below.)

About the CF Meetup

In case you've missed it, the CF Meetup is an online CF user group I run. I try to have weekly meetings, with speakers all over the world. FWIW, this is only the 2nd talk I've done of the 40 talks done so far, and the first this year. Anyone's welcome to attend.

While the descriptions of meetings are held on the meetup.com site (a commercial service to help groups meet up with each other), the actual meeting is held online at http://experts.acrobat.com/cfmeetup/. Anyone may join in on the meetings. Just log in as guest (everyone should, even registered members of the group.)

If you'd like to receive email notification of the meetings, as well as have access to other resources (to give ratings, take part in polls, participate in the mailing list/forums), you can join the group at no cost, again at coldfusionmeetup.com (which redirects to our group's site on the meetup site, http://coldfusion.meetup.com/17/.)

Finally, all meetings are recorded, and the recording URL will be posted after the meeting at http://recordings.coldfusionmeetup.com.

New CFMeetup Event - "Step Debugging in ColdFusion 6/7/8", with Charlie Arehart

Note: This blog post is from 2007. Some content may be outdated--though not necessarily. Same with links and subsequent comments from myself or others. Corrections are welcome, in the comments. And I may revise the content as necessary.
Announcing a new event for The Online ColdFusion Meetup Group!

What: "Step Debugging in ColdFusion 6/7/8", with Charlie Arehart

When: Thursday, Dec 6, 6:00pm EST (GMT-5) (What time is that for you? See this table, which shows it at EST, and you can choose your city from the list offered to see your time.)

Meeting URL: http://experts.acrobat.com/cfmeetup/
Duration: Approx. 1 hour
Meeting will be recorded. URL will be posted after meeting on the Meetup Message Board, which can also be reached directly via http://tinyurl.com/2dbdnk

Our second talk on Thursday, Dec 6, at 6pm, will be your ColdFusion Meetup host, Charlie Arehart, speaking on "Step Debugging in ColdFusion 6/7/8", discussing use of both ColdFusion 8's debugger (CF8 only) and FusionDebug (for 6, 7, and 8).

Description:

In this talk, veteran CFML developer Charlie Arehart will introduce and demonstrate the ability all ColdFusion developers now have to step through their code interactively to debug it, whether running on CF 6, 7, or 8. For those moving to CF8, there is now a debugger built into CF, but it works only with CF8. For those on CF 6, 7, or 8, they can use the commercial FusionDebug tool (www.fusiondebug.com) . Both are plug-ins for Eclipse which enable step debugging, and they're very similar, which is why Charlie will show them both in the one talk. He'll also cover some differences.

Don't worry if you don't care for Eclipse. You can continue to use DWMX or CF Studio/HomeSite+ for editing: just use the Eclipse-based tools for debugging. Charlie will show you how easy it is and the problems step debugging can solve. And if you're thinking you don't need interactive debugging, Charlie will also explain over a dozen benefits this offers over traditional CFDUMP/CFOUTPUT debugging, as well as tips, tricks, and traps.

About Charlie Arehart:

A veteran ColdFusion developer since 1997, Charlie Arehart is a longtime contributor to the community and a recognized Adobe Community Expert. He's a certified Advanced CF Developer and Instructor for CF 4/5/6/7 who served as tech editor of the ColdFusion Developers Journal until 2003. Now an independent contractor living in Alpharetta GA, Charlie provides high-level troubleshooting/tuning assistance and training/mentoring for CF teams (carehart.org/consulting). He helps run the Online ColdFusion Meetup (coldfusionmeetup.com, an online CF user group), is a contributor to the CF8 WACK books by Ben Forta, and is frequently invited to speak to developer conferences and user groups worldwide.

Notices:

As always, we do appreciate folks RSVPing if they plan to come (using the link on this email or at the meetup site), though it's not mandatory and it's not a commitment. BTW, no need to RSVP if you can't make it nor even explain why you can't. With 1,000+ members, there's really no reason to explain your absence. :-) We'll also appreciate your sharing your feedback after the meeting (also offered via a follow-up email or via a link on the site).

Please note, as well, that when you use the acrobat.com (Connect) link above to view the meeting, the login screen presented there has no connection to the login information you've provided to access this meetup.com site. The two services are entirely unrelated. Please just log in with the guest account in Connect, even if you have a real connect account.

Finally, again, the recording URL will be posted on the Meetup Message Board, which can also be reached directly via http://tinyurl.com/2dbdnk

Learn more here: http://coldfusion.meetup.com/17/calendar/6827442/

Copyright ©2025 Charlie Arehart
Carehart Logo
BlogCFC was created by Raymond Camden. This blog is running version 5.005.
(Want to validate the HTML in this page?)

Managed Hosting Services provided by
Managed Dedicated Hosting