Note: This blog post is from 2008. Some content may be outdated--though not necessarily. Same with links and subsequent comments from myself or others. Corrections are welcome, in the comments. And I may revise the content as necessary.

• Are there SQL batches that actually run for a long time?
• Is there blocking in the database?
• Are there any problems in the configuration options of SQL Server?
• Is there a disk IO problem?
• Are there any indications of memory problems?

Good stuff that even we CFers can benefit understanding. Again, while it's from a Microsoft support engineer who focuses on .NET debugging in her blog, there's really nothing about this blog entry or the last that's .NET specific.

Note: This blog post is from 2008. Some content may be outdated--though not necessarily. Same with links and subsequent comments from myself or others. Corrections are welcome, in the comments. And I may revise the content as necessary.

To backup and explain the problem, some have lamented that in CFMX 6 and 7, CFMAIL used the name of your server where CF is installed, which might be something like "server1" or "bingo", as in:

This might cause a recipient mail server to flag the mail as spam, if the mail server was a different domain name (like "yourcompany.com"). The bummer was that many found no way to fix this. Sure, in CF5 you could set it in a CFMAILPARAM to set a mail header, but CF 6 and above ignores that.

The good news for those on CF 8 is that a change makes the problem go away, which I talked about in a blog entry back in December.

But for those still on 6 or 7, I'd mentioned that there's an available code or (preferably) configuration fix to resolve the problem. Apologies for not posting it at the time, so here it is. I also explain what the issue is all about, for those not aware of it.

Simple CF5 solution doesn't work in 6, 7, or 8

First, let me point out that some may propose that one can just use CFMAILPARAM to set that message-id header, as was mentioned in this FAQ:

http://www.developer.be/index.cfm/fuseaction/faqDetail/FaqId/201.htm

Unfortunately, that's a very old FAQ and it no longer applies after CF5.

CFMX 6 (and 7 and 8) ignore that header you set and set the message-id themselves to the name of the physical server from which the mail's sent. Here's an example, from my laptop (which is named charlied620):

On your server, it could be that the problem is that the server is a real domain name, but it's not the same name as the SMTP server through which you're sending email via CFMAIL, and some servers won't let mail through with FROM addresses having a different domain name.

Why doesn't CF just use the SERVER set in CFMAIL or the CF Admin?

You might wish/expect it would just use name of the mail server as specified in the CF Admin mail server setting or the CFMAIL SERVER attribute, but it does not (at least, not prior to CF8, as discussed in my earlier entry.)

But while researching this problem for the person, I found this, where a very compelling solution was proposed. I tested it, and it does indeed work.

It turns out that you can get CFMAIL to use a specific mail server, either of 2 ways, for CF 6, 7, or 8 (again, on CF8, the easier solution is that I discussed in the earlier entry). Ken Smith of Adobe offered it also in this Adobe forum thread. If you make this change, either server-wide or per page/app, you will now find that the CFMAIL sets the message-id to use a desired servername.

Solution for 6, 7, or 8: Configuring it at CF Startup

If you're on a server where you want to change this for all CFMAIL (and javamail) done from within CF, you can change the JVM.config for your server to add this to the java.args line:

That java.args line is one long line. Don't introduce any line breaks. You need to restart the server after making that change. As always, when editing the JVM.config (in the runtim/bin directory of CF), make a backup first, because if you get it wrong, your server won't restart. (Or leave the file open and be prepared to do an Undo in your editor.)

But if you don't want to (or can't) mess with the startup file, or more important, if you are on a server where each app may need to do its own setting, you're not out of luck.

Solution for 6, 7, or 8: Changing it programatically

You can also make the needed change on the fly, programatically. You could issue this set of code just before your CFMAIL:

I tried this per-page setting in in 6 and 7 and it worked fine. For CF8, the code will run, but it won't affect the CFMAIL for reasons I explain in the next section. But there's a real problem with this approach, if you're on a shared CF server. You're still setting the value for the entire CF server, but you're just doing it on the fly. It has at least a few problems you need to think about:

• you'll affect all who use CFMAIL on this server (at least in 6, and 7, since CF8 ignores this, as discussed below)
• you'll also affect anyone who uses Javamail on this instance of CF
• and if someone else on the server issue the same code with a different server name, that of course would override your setting

There are a few things you can do to mitigate the problem, but they're not entirely perfect.

First, you could get the current mail.host value (in case it's different), then change it to what you want, and then change it back. You could do that with this code:

Note that if the mail.host property has not been set in the startup config or by someone else running such code, then the getproperty will return nothing, and the oldmailserver variable literally will not be created (a curiosity of working with some java methods).

Once you have the oldmailserver (or know that it did not exist), you can do the set of the property and the cfmail as above, then you could set it back with the following:

There's still a problem. Because of CF's multi-threaded nature, it's entirely possible that between your setting the host and doing your CFMAIL, someone else could also set the mail server to something different. (This is called a "race condition".)

Now, Mr. Smith in the threads above suggested that you could wrap the code doing the change and the CFMAIL in a named lock, but that's an incomplete solution. It will prevent other other code (that ALSO does the same named lock) from running until yours is complete, but it won't help if others do the set of the property without bothering to use the same named lock (or use a differently named lock).

That's a frequent misconception about locks. They don't prevent other code doing what you're doing in the lock: they only tell other code that IS using the same lock not to run while this lock is held--and even then, only if you use an EXCLUSIVE lock, which he didn't indicate.

So the bottom line is that as useful as the feature is to set the property dynamically, it's fraught with peril in an environment where multiple apps may try to use the code. Only if you can guarantee that all use the same named lock will you be able to protect against this problem is held up while you have the value changed:

Now, someone may propose that all this could be wrapped up into UDFs or CFC methods, and perhaps it could, but since you need to do the setting of the value, and the mail, and the resetting of the value, all within a CFLOCK, it would be challenging to wrap all this up into a generically callable method (unless you wanted to pass in as well all the CMAIL attribute values and the body). Just seems not worth it, since this is a pretty esoteric problem and solution. But others can comment if they feel differently.

Solution for CF8 is much easier

All this is obviated on CF8, because it now properly uses the name of the server specified in the CF Admin mail server setting (or CFMAIL SERVER attribute, which overrides the CF Admin setting.) This is AWESOME news for those challenged by this, and hasn't gotten much press.

Now, what was the caveat I mentioned above? Well, if you use the approach of setting the mail.host servername in the java property, CF8 no longer pays attention to that. It JUST uses the CF Admin mail server setting, or the CFMAIL SERVER attribute. So that code above "won't work". It will work, but it won't affect CFMAIL. But that was a hack to work around CF not honoring these other attributes. I'm not surprised (or bummed myself) to see that it no longer regards the mail.host property for CFMAIL.

(I should say I'm saying this as of CF8. I've not tested it on 8.0.1.)

Some related notes

If you add the SERVER attribute, you may need to add the PORT, Username, and Password as well.

Here's a little bonus tip, in case you try to use the CFMAIL SERVER attribute for the first time on an existing CFMAIL tag to check this out. Note that using the SERVER attribute on CFMAIL requires you then to specify any other attributes required for the mail connection such as USERNAME and PASSWORD (if needed) and PORT (if not 25). What I mean is that it will no longer pick up the values in the CF Admin. If you override the SERVER, then you override the other config settings as well and need to specify them.

I'm not getting the emails now. Where are they?

If you make a mistake in your setting of the mail server arguments, then CF will move the failed emails to the [coldfusion]/mail/Undelivr directory where CF is installed. They're just plain text files. You can open them to see what got set and perhaps can figure out why they failed. You may also find information in the [coldfusion]/logs/mail.log.

When I look at mail in the spool, it looks fine (if I use CFMAILPARAM). Why doesn't it get through?

Don't be misled. The email you generate in CFMAIL may look fine in the [coldfusion]/mail/spool directory, but when it gets sent to the mail server, CF will change that message-id (and some other headers). You really need to look at the email as it's RECEIVED. You can't even look at the message in the Undelvr folder as an indication. It doesn't have those added headers.

So how DO I observe the mail headers?

You need to receive the email and then look at its headers. I'll show you how to do that in Outlook and gmail in a moment. Let me point out that it can be very englightening to view the message headers: not only the message-id but possibly also other headers as well as messages that CF, your mail server, or the mail server of your recipient may have added, which may include indications of whether your email was detected to be spam (perhaps by tools like SpamAssassin).

In Outlook, you can use View>Options while reading an email, to see the values in the "Internet Headers" box of the window that opens. Scroll down in that to find the message-id and other headers.

In gmail, when you open the message, look to the top right of the pane showing your email, to the right of the indicator of the time the message was received. There's a drop-down box, with options like "reply" and "forward". Choose "show original". That will show the complete message including all the headers at the top.

Other CFMAIL alternatives/replacements

Finally, I'll point out that if you run into other problems with CFMAIL, there are always alternative CF mail server solutions, like those I list in the "CFMAIL replacement/enhancement tools" section of my "Tools to Consider for CFML developers" page.

Hope that helps some.